Table of Contents
Advertisement
Quick Links
Telescoping Quad Monitor Desk Mount
Instruction Manual
SKU: STAND-TS38B-4
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-ts38b-4
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-TS38B-4
Summary of Contents for Vivo STAND-TS38B-4
- Page 1 Telescoping Quad Monitor Desk Mount Instruction Manual SKU: STAND-TS38B-4 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-ts38b-4 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
- Page 3 ASSEMBLY STEPS STEP 1 Install Bottom Pole (A) to Base (D) using M5x16 Screws (S-A). Tighten with the 3mm Allen wrench (T-A). STEP 2 Thread Middle Pole (B) onto Bottom Pole (A), and Top Pole With Cap (C) onto Middle Pole (B).
- Page 4 STEP 3 Install Arms (F) to Arms with Pole Collar (E) using M8x42mm Screws (S-B) and the 5mm Allen Wrench (T-B). Ensure the tilt joints are facing in the same direction during installation. STEP 4 Slide Pole Cable Clips (H) and arm assemblies onto the pole assembly. Secure arm assemblies using 6mm Allen Wrench (T-C).
- Page 5 STEP 5 OPTION A: Flat Back Monitor Attach the VESA Plates (G) to the monitor with Thumbscrews (M-A). NOTE: Hand tighten screws to avoid over tightening. OPTION B: Curved Back Monitor Attach VESA Plate (G) to the monitor with M4x30mm Screws (M-B) and M4 Spacers (M-C). NOTE: Gently tighten using a screwdriver...
- Page 6 STEP 6 Slide VESA Plates (G) onto the arm assemblies. The monitors can be leveled using 3mm Allen Wrench (T-A). Secure using M6 Cap Nuts (S-C). STEP 7 Adjust the length of arm assemblies using 3mm Allen Wrench (T-A).
- Page 7 STEP 8 Manage cables using Arm Cable Clips (I) and Pole Cable Clips (H). STEP 9 Adjust the tilt using 5mm Allen Wrench (T-B).
- Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-TS38B-4 and is the answer not in the manual?
Questions and answers