Advertisement
Quick Links
Dual Monitor Desk Mount
Instruction Manual
SKU: STAND-TS38C
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-ts38c
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!
Advertisement
Related Manuals for Vivo STAND-TS38C
Summary of Contents for Vivo STAND-TS38C
- Page 1 Dual Monitor Desk Mount Instruction Manual SKU: STAND-TS38C Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-ts38c GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Assembly Steps
ASSEMBLY STEPS STEP 1 OPTION A: Clamp Install Mount Upper Clamp (C) to Pole (A) using M5x16mm Screws (S-A) and 3mm Allen Wrench (T-A). Remove adhesive backing from Clamp Soft Pad (I) and attach to Upper Clamp (C). Assemble Lower Clamp (B) to Upper Clamp (C) using M8x12mm Screws (S-B) and 5mm Allen Wrench (T-B) and secure the assembly to the desktop. - Page 4 STEP 2 Slide Pole Cable Clip (G) and Swivel Arm (D) over Pole (A). Secure Swivel Arm (D) using 6mm Allen Wrench (T-C). Attach Arm Cable Clips (H) to Swivel Arm (D). STEP 3 Assemble VESA Plate (E) to the back of the monitor using M4x12mm Thumbscrews (M-A). For curved monitors, use M4x30mm Screws (M-B) with M4 Spacers (M-C).
- Page 5 STEP 4 Slide VESA Plates (E) onto the Swivel Arm (D) and secure using M6 Cap Nuts (S-C).
- Page 6 STEP 5 Adjust the tilt using 5mm Allen Wrench (T-B). STEP 6 The monitors can be leveled using 3mm Allen Wrench (T-A).
- Page 7 STEP 7 Adjust the length of Swivel Arm (D) using 3mm Allen Wrench (T-A). Manage cables using Arm Cable Clips (H) and Pole cable Clip (G).
- Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-TS38C and is the answer not in the manual?
Questions and answers