Teknik 5425907 Manual page 21

Step 17
Fasten the LONG BRACES (O) to the LEGS (B and C). Use four
å
BLACK 1/2" PAN HEAD SCREWS (18).
NOTE: Start all the SCREWS a few turns before tightening them.
å
Fasten the LONG BRACES (O) together. Use the BLACK 5/16"
å
MACHINE SCREW (21) and NUT (11) in the center holes in the
LONG BRACES exactly as shown.
NOTE: If the center holes in the LONG BRACES (O) do not line
å
up, loosen the SCREWS in the LEGS and then retighten once
the LONG BRACES are fastened together.
NOTE: Tighten the NUT using the TOOL (12).
å
21
C
BLACK 1/2" PAN HEAD SCREW
(4 used in this step)
B
O
11
12
21
BLACK 5/16" MACHINE SCREW
(1 used in this step)
18
Page 21