Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Teknik Manuals
  4. Indoor Furnishing
  5. 5425907
  6. Manual

Teknik 5425907 Manual

Steel gorge desk milled mesquite
Hide thumbs

Advertisement

Quick Links

Download this manual
Teknik
www.teknikoffice.co.uk
Sit and surf.
Steel Gorge Desk Milled Mesquite
Model 5425907

Advertisement

loading

Related Manuals for Teknik 5425907

Summary of Contents for Teknik 5425907

  • Page 1 Teknik www.teknikoffice.co.uk Sit and surf. Steel Gorge Desk Milled Mesquite Model 5425907...
  • Page 2 Table of Contents Assembly Tools Required Part Identifi cation Hardware Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Assembly Steps 5-28 Français 29-32 Español 33-36 Skip the power trip. This time. Safety 37-38 Warranty Page 2...

  • Page 3: Part Identification

    Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. RIGHT LEG (1) LARGE BACK (1) LARGE DRAWER BACK (1)

  • Page 4: Hardware Identification

    Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. (EXTENSION SET SHOWN SEPARATED) LEFT RAIL - 1 RIGHT RAIL - 1 EXTENSION RAIL - 2 EXTENSION SLIDE - 2 SMALL HIDDEN HIDDEN CAM - 12 CAM SCREW - 24 WOOD DOWEL - 4 CAM - 12...
  • Page 5 Step 1 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Fasten the LEFT LEG (B) to the LEFT UPRIGHT (H). Use å two BLACK 1-3/4" PAN HEAD SCREWS (13) and two BLACK 1/2"...
  • Page 6 Step 2 Fasten the LEFT RAIL (1) and one of the SMALL å EXTENSION BLOCKS (M) to the LEFT UPRIGHT (H) exactly as shown. Use two BLACK 11/16" FLAT HEAD SCREWS (16). NOTE: Find the back hole fi rst. Then, slide the inner å...
  • Page 7 Step 3 Fasten four METAL BRACKETS (9) to the CENTER å LEG (C) exactly as shown. Use four BLACK 1/2" PAN HEAD SCREWS (18). BLACK 1/2" PAN HEAD SCREW (4 used in this step) Page 7...
  • Page 8 Step 4 Fasten the CENTER LEG (C) to the CENTER END (F) and å CENTER UPRIGHT (G). Use four BLACK 1/2" PAN HEAD SCREWS (18) through the METAL BRACKETS on the CENTER LEG and into the CENTER END and CENTER UPRIGHT. Finish fastening the CENTER LEG (C) to the CENTER END (F) å...
  • Page 9 Step 5 Fasten one of the LARGE EXTENSION BLOCKS (L) to the å CENTER END (F). Use two BLACK 1" PAN HEAD SCREWS (14) in the outer holes. BLACK 1" PAN HEAD SCREW (2 used in this step) Surface with more holes This hole is closer to this edge.
  • Page 10 Step 6 Carefully fl ip the CENTER LEG (C) over. å Fasten the RIGHT RAIL (2) and the remaining SMALL å EXTENSION BLOCK (M) to the CENTER UPRIGHT (G) exactly as shown. Use two BLACK 11/16" FLAT HEAD SCREWS (16). NOTE: Find the back hole fi...
  • Page 11 Step 7 Fasten two METAL BRACKETS (9) to the RIGHT å LEG (A) exactly as shown. Use two BLACK 1/2" PAN HEAD SCREWS (18). BLACK 1/2" PAN HEAD SCREW (2 used in this step) Page 11...
  • Page 12 Step 8 Fasten the RIGHT LEG (A) to the RIGHT END (E). Use two å BLACK 1/2" PAN HEAD SCREWS (18) through the METAL BRACKETS on the RIGHT LEG and into the RIGHT END. Finish fastening the RIGHT LEG (A) to the RIGHT END (E). å...
  • Page 13 Step 9 Fasten the remaining LARGE EXTENSION BLOCK (L) å to the RIGHT END (E). Use two BLACK 1" PAN HEAD SCREWS (14) in the outer holes. BLACK 1" PAN HEAD SCREW (2 used in this step) Surface with more holes This hole is closer to this edge.
  • Page 14 Step 10 Separate the EXTENSION SLIDES (4) from the EXTENSION RAILS (3) as å shown in the enlarged diagram below. Be prepared, the parts are greasy. Fasten the EXTENSION RAILS (3) to the LARGE EXTENSION BLOCKS (L). å Use four BLACK 1/2" FLAT HEAD SCREWS (19). NOTE: For each EXTENSION RAIL, turn a SCREW into the back hole.
  • Page 15 Step 11 Separate the BLACK 1/2" MACHINE SCREWS (17 and 20). Use å the thicker SCREW (20) in this step. Turn two CAM SCREWS (7) into the RIGHT END (E). å Insert two SMALL HIDDEN CAMS (6) into the LARGE BACK (J). å...
  • Page 16 Step 12 Insert two SMALL HIDDEN CAMS (6) into the LARGE BACK (J). å Fasten the CENTER END (F) to the LARGE BACK (J). Tighten å two HIDDEN CAMS. Fasten the CENTER LEG (C) to the SHORT BRACES (P). Use å...
  • Page 17 Step 13 Carefully stand your unit upright. å Turn four CAM SCREWS (7) into the SHELF (K). å Insert four HIDDEN CAMS (5) into the ENDS (E and F). å Fasten the SHELF (K) to the ENDS (E and F). Tighten four å...
  • Page 18 Step 14 Turn two CAM SCREWS (7) into the LEFT UPRIGHT (H). å Insert two HIDDEN CAMS (5) into the BACK (I). å Fasten the BACK (I) to the LEFT UPRIGHT (H). Tighten å two HIDDEN CAMS. Fasten the BRACE (N) to the LEFT LEG (B). Use two å...
  • Page 19 Step 15 Carefully stand the LEFT LEG (B) upright. å Turn two CAM SCREWS (7) into the CENTER UPRIGHT (G). å Insert two HIDDEN CAMS (5) into the BACK (I). å Fasten the BACK (I) to the CENTER UPRIGHT (G). Tighten å...
  • Page 20 Step 16 Turn four CAM SCREWS (7) into the TOP (D). å Insert four HIDDEN CAMS (5) into the UPRIGHTS (G and H). å Fasten the TOP (D) to the UPRIGHTS (G and H). Tighten four å HIDDEN CAMS. Fasten the TOP (D) to the RIGHT LEG (A). Use two BLACK å...
  • Page 21 Step 17 Fasten the LONG BRACES (O) to the LEGS (B and C). Use four å BLACK 1/2" PAN HEAD SCREWS (18). NOTE: Start all the SCREWS a few turns before tightening them. å Fasten the LONG BRACES (O) together. Use the BLACK 5/16" å...
  • Page 22 Step 18 Fasten the LARGE DRAWER SIDES (Q and R) to the å LARGE DRAWER BACK (S). Use four BLACK 1" FLAT HEAD SCREWS (15). Slide the LARGE DRAWER BOTTOM (T) into the grooves å in the LARGE DRAWER SIDES (Q and R) and LARGE DRAWER BACK (S).
  • Page 23 Step 19 Turn four CAM SCREWS (7) into the LARGE å DRAWER FRONT (AA). Peel two BUMPERS from the BUMPER CARD (22) and stick them å onto the LARGE DRAWER FRONT (AA) in the locations shown. Insert four SMALL HIDDEN CAMS (6) into the LARGE å...
  • Page 24 Step 20 Fasten the DRAWER SIDES (U and V) to the DRAWER å BACK (W). Use four BLACK 1" FLAT HEAD SCREWS (15). Insert two WOOD DOWELS (8) into the holes in the å DRAWER BACK (W). Push the DRAWER BRACE (Y) onto the WOOD DOWELS å...
  • Page 25 Step 21 Turn four CAM SCREWS (7) into the DRAWER FRONT (Z). å Insert four SMALL HIDDEN CAMS (6) into the DRAWER å SIDES (U and V). Insert two WOOD DOWELS (8) into the DRAWER BRACE (Y). å Fasten the DRAWER FRONT (Z) to the DRAWER SIDES (U å...
  • Page 26 Step 22 Pull the extensions of the RAILS (1 and 2) out from the å RAILS. Insert the DRAWER (Z) so it rests on the brackets of the RAILS. Line up the holes in the DRAWER SIDES (U and V) with the brackets on the RAILS. Fasten the DRAWER (Z) to the RAILS (1 and 2).
  • Page 27 Step 23 To insert the LARGE DRAWER (AA) into your unit, line up å the EXTENSION SLIDES on the drawer with the EXTENSION RAILS on the unit and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all the way in, then it will slide in and out easier.
  • Page 28 Step 24 NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry. å 60 lbs. 30 lbs. 30 lbs. 20 lbs. Page 28...
  • Page 29 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves and drawers. •...