Advertisement
Quick Links
Advertisement
Related Manuals for Teknik Market 5425768
Summary of Contents for Teknik Market 5425768
- Page 1 Teknik It's addicting. Market Lift Up Coffee Table Model 5425768...
- Page 2 Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-15 Skip the power trip. This time. Page 2...
- Page 3 Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. PANEL (2) SHELF (1) LEFT END (1)
- Page 4 Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. HIDDEN CAM - 6 CAM SCREW - 6 WOOD DOWEL - 8 BUMPER CARD - 1 BUSHING - 2 WASHER - 2 LIFT TABLE STRETCHER - 1 L-WRENCH - 1 MECHANISM SET - 1...
- Page 5 Hardware Usage Guide HOW TO USE A HIDDEN CAM & CAM SCREW OR CAM DOWEL NOTE: Various CAM SCREWS or a CAM DOWEL may be used. Turn the CAM SCREW or gently tap the CAM DOWEL until the shoulder is against the surface of the part.
- Page 6 Step 1 Assemble your unit on a carpeted fl oor or on the empty carton to å avoid scratching your unit or the fl oor. Turn six CAM SCREWS (2) into the PANELS (A). å Push six HIDDEN CAMS (1) into the SHELF (B). å...
- Page 7 Step 2 Fasten the SHELF (B) to one of the PANELS (A). Tighten å three HIDDEN CAMS. Some assembly NOTE: Be sure the WOOD DOWELS in the SHELF insert å (and snacks) required. into the PANEL. Fasten the other PANEL (A) to the SHELF (B). Tighten å...
- Page 8 Step 3 Fasten the RIGHT END (D) to the PANELS (A) and SHELF (B). å Tighten four BLACK 1-7/8" HEX HEAD SCREWS (10) using the L-WRENCH (8). NOTE: You should start each SCREW a few turns before å completely tightening any of them. NOTE: Be sure the WOOD DOWELS in the SHELF insert into å...
- Page 9 Step 4 Fasten the BOTTOM (E) to the RIGHT END (D). å Tighten two BLACK 1-3/16" HEX HEAD SCREWS (11) using the L-WRENCH (8). NOTE: You should start each SCREW a few turns å before completely tightening any of them. BLACK 1-3/16"...
- Page 10 Step 5 Fasten the LEFT END (C) to the PANELS (A) and SHELF (B). å Tighten four BLACK 1-7/8" HEX HEAD SCREWS (10) using Now might be a the L-WRENCH (8). good time to refresh your drink. NOTE: You should start each SCREW a few turns before å...
- Page 11 Step 6 Insert the ends of the STRETCHER (7) into the posts on the LIFT å TABLE MECHANISM SET (9). Be sure the holes in the STRETCHER line up with the holes in the posts. First, fasten the front edges of the LIFT TABLE MECHANISM SET (9) å...
- Page 12 Step 7 Carefully stand your unit upright. å NOTE: Be sure not to scratch the ENDS (C and D) in this step. å With someone's help, fasten the LIFT TABLE MECHANISM å SET (9) to the ENDS (C and D). Use twelve BLACK 9/16" PAN HEAD SCREWS (13).
- Page 13 Step 8 Finish fastening the LIFT TABLE MECHANISM SET (9) to å the ENDS (C and D). Use two BLACK 11/16" PAN HEAD SCREWS (12), two BUSHINGS (5), and two WASHERS (6) in the exact holes shown. NOTE: Do not overtighten the SCREWS (12). å...
- Page 14 Step 9 Fasten the LIFT TABLE MECHANISM SET (9) to å the STRETCHER (7). Use two BLACK 3/8" PAN Almost time to HEAD SCREWS (14). celebrate! With a nap. BLACK 3/8" PAN HEAD SCREW (2 used in this step) Page 14...
- Page 15 Step 10 IMPORTANT: Do not place valuables in the storage space. å Peel BUMPERS from the BUMPER CARD (4) and stick them onto the top edges of the PANELS (A) as shown. å NOTE: Please read the back pages of the instruction booklet for important safety information. å...
- Page 16 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves. •...