Advertisement
Step 6
Carefully fl ip the CENTER LEG (C) over.
å
Fasten the RIGHT RAIL (2) and the remaining SMALL
å
EXTENSION BLOCK (M) to the CENTER UPRIGHT (G) exactly
as shown. Use two BLACK 11/16" FLAT HEAD SCREWS (16).
NOTE: Find the back hole fi rst. Then, slide the inner cartridge
å
of the RIGHT RAIL in to fi nd the other hole that lines up with
the hole in the SMALL EXTENSION BLOCK and CENTER
UPRIGHT. Turn a SCREW into this hole.
BLACK 11/16" FLAT HEAD SCREW
(2 used in this step)
Page 10
16
These edges
should be even.
Line up the
back hole fi rst.
G
2
M
Finished surface
C
2
This hole is closer
to this edge.
Advertisement
