System Setup; Geodetic Data - Furuno SC-50 Operator's Manual

3.9

System Setup

3.9.1

Geodetic data

Your unit is preprogrammed to recognize most of the major chart systems of the
world. Although the WGS-84 system (default setting) is the GPS standard, other
categories of charts in other datum still exist. Match the GPS datum with the
chart system you use.
1. Press the [MENU] key to open the menu.
2. Choose SYS SETUP and then press the [ENT] key.
3. Confirm that the cursor is selecting DATUM and then press the [ENT] key.
4. Choose WGS84 (GPS standard), WGS72 or OTHER according to the
nautical chart you use and then press the [ENT] key.
5. If you chose WGS72 or WGS84, press the [DISP] key to finish. For OTHER,
go to step 6.
6 Press the [ENT] key.
7. Use the Omnipad to enter chart number, referring to the geodetic chart list on
page A-2. Choose location with ◄ or ►; change value with ▲ or ▼.
8. Press the [ENT] key.
9. Press the [DISP] key to close the menu.
SYSTEM SETUP
DATUM
UNITS
TIME DIFF
TIME DISP
TEST?
DEMO
EXCHANGE BATTERY?
SYSTEM SETUP menu
Get other manuals https://www.bkmanuals.com
: WGS84
: kt
: +00:00
: 24 HOUR
: OFF
3. OPERATION
3-13