Furuno SC-50 Operator's Manual

SC-50 THD SATELLITE COMPASS
The purpose of this Operator's Guide is to provide basic operating procedures for this
equipment. For more detailed information, see the Operator's Manual.
MENU key: Opens menu.
DISP key: Selects display; closes menu.
Turning Power On/Off
Use the power switch on the processor unit
to power the display unit on/off.
Dimmer, Display Contrast
1. Press the DIM key.
DIMMER (1-8)
CONTRAST (0-63)
EXIT: [ENT]
2. Press [up] or [down] arrow to adjust
dimmer (panel illumination).
3. Press [left] or [right] arrow to adjust
display contrast.
4. Press the ENT key.
All manuals and user guides at all-guides.com
Operator's Guide
Omnipad: Selects menu items; shifts cursor.
ENT
MENU
DISP
DIM
HDG
SETUP
SATELLITE
SAT
STATUS
COMPASS
SAT STATUS key: Shows satellite tracking
4
45
ENT key: Terminates keyboard input.
DIM key: Adjusts panel illumination,
display contrast.
HDG SETUP key: Choose heading
status display.
Choosing a Display
Use the DISP key to choose desired display,
among heading, steering, compass, ROT
and speed.
Smoothing Position
1. Press the MENU key.
2. Choose GPS SETUP and then press the
ENT key.
GPS SETUP
SMOOTH POS :
SMOOTH S/C :
LAT OFFSET :
LON OFFSET :
DISABLE SV :
3. Choose SMOOTH POS and press the
ENT key.
4. Use the Omnipad to enter smoothing
value and then press the ENT key.
5. Press the DISP key to finish.
source.
0SEC
5SEC
0.000'N
0.000'E