Furuno SC-50 Operator's Manual page 48

2) Use the Omnipad to choose WAAS satellite search method, AUTO or
MANUAL as appropriate. For MANUAL, press the [ENT] key, enter
appropriate WAAS satellite referring to the illustration below and then press
the [ENT] key.
Provider
POR (134)
WAAS
AOR-W (122)
AOR-E (120)
EGNOS
IOR (131)
118°W
3) CORRECTIONS DATA SET is selected; press the [ENT] key.
CORRECTIONS DATA SET determines how to use the WAAS signal, which
is currently in the test mode. Use the default setting (02) until the WAAS
system becomes operational, then change the setting to "00."
6. Choose DPGS STATION and press the [ENT] key.
7. Choose MANUAL or AUTO as appropriate and press the [ENT] key. For
AUTO got to step 8. For MANUAL do the following:
1) RATE is selected; press the [ENT] key.
Get other manuals https://www.bkmanuals.com
GEO Satellite
34.75°W 24.5°E
2°
2°
122 120
AOR-W AOR-E
54°W 15.5°W
One-degree threshold
Longitude Range
° °
120.25 E to 117 W
° °
119 W to 33.75 W
° °
35.75 W to 25.5 E
° °
23.5 E to 122.25 E
GEO satellite and coverage area
AUTO
MANUAL
AUTO/MANUAL options
50BPS
100BPS
200BPS
Baud rate options
3. OPERATION
Longitude
178°E
54°W
15.5°W
64.5°E
121.25°E
2° 2°
131 134
IOR POR
64.5°W 178°E
Satellite
134
122
120
131
3-17