SSV Works X32-PUS10 Quick Start Manual

SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in material
or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against
defects in material or workmanship. All Kicker Speakers are covered by a limited 1 year
warranty against defects in material or workmanship. All Kicker Amplifiers are covered by a
limited 2 year warranty against defects in material or workmanship. Labor for replacement of
defective components is not covered. Contact SSV Works for further warranty information.
TOOLS NEEDED FOR INSTALLATION
- 10mm, 13mm, 16mm and
18mm Sockets & Wrenches
PARTS LIST IMAGES
1. X32-PUS10 Enclosure
5. Large Washers x1
9. Seat Spacer x1
- T-30 Torx - 1½" Hole Saw
Driver
2. M6x1.0x16mm T30 Torx
Screws & Washers x10
6. D-Bracket x1
10. Brake Line Spacer x1
2016+ Can-Am Maverick x3
10" Passenger Side Under Seat Enclosure
!
- Hole Punch / - Ratchet & Extension
Scribe Tool
Triangular
end
3. Thread Rolling Screw x2
(#3 Phillips Screwdriver)
7. B-Bracket x1
11. M6 10mm lock nut x1
X32-PUS10
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
- #3 Phillips
Screwdriver
4. M6x1.0x25mm T30
Torx Screw x1
8. Large Bracket
12. Foam Strips x5