SSV Works F3-2A Manual

I
SSVWORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com
I
Phone: 818-991-1778
I
Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects
in material or workmanship. All SSV Works Electronics are covered by a limited 1 year
warranty against defects in material or workmanship. All SSV Works Speakers are
covered by a limited
1
year warranty against defects in material or workmanship. Labor
for replacement of defective components is not covered. Contact SSV Works for further
warranty information.
TOOLS NEEDED FOR INSTALLATION
F3-2A / F3-2K
Can-Am Spyder F3
Audio Kit
Pl
1
ease read and understand these
instructions completely before
installation to avoid possible injiury, or
damage to the accessory or vehiclle.
-T25 torx driver - Panel Removal Tool - #4 and #3 Hex Driver
- Phillips screw driver
PARTS LIST IMAGES
1. US2-C65 Pods (1 pair with
SSV Works or Kicker Speakers)
5. Speaker Pod Mounting
Bracket
&
Spacer (1 pair)
~
-
---
9. MRB3 Brain Plate MS
Screwsx4
~~,.... ~
- ~ -
- , 11 .. -.:.
2. MRB3 Controller & Brain
6. WP-H1149 Speaker Harness
0
10. MRB3 Controller Screws
&Washersx2
3. MRB3 Brain Mounting
Bracket
7. Antenna
11. M6 Set Screws x 8
4. MRB3 Controller Mount
8. Speaker Pod Mounting Bracket
Screws x4 (short
&
long)
12. MRB3 Power & Ground
Connector B-H 1221