The Toolbar Icons - ATEN RCM Series User Manual

The Toolbar Icons

The meanings of the toolbar icons are explained in the table below.
Icon
Click to skip to the first accessible port on the entire installation,
without having to recall the Port Access page.
Click to skip to the first accessible port previous to the current
one, without having to recall the Port Access page.
Click to begin Auto Scan Mode. The RCM Series of KVM Over
IP Switch automatically switches among the ports that were
selected for Auto Scanning with the Filter function (see Filter,
page 105). This allows you to monitor their activity without
having to switch among them manually.
Click to skip from the current port to the next accessible one,
without having to recall the Port Access page.
Click to skip from the current port to the last accessible port on
the entire installation, without having to recall the Port Access
page.
Click to recall the Port Access page.
Click to close the toolbar.
Click to invoke Panel Array Mode (see Panel Array Mode,
page 223).
Chapter 12. Port Operation
Purpose
219