Firmware Upgrade Recovery - ATEN RCM Series User Manual

Chapter 10. Maintenance

Firmware Upgrade Recovery

Should the switch's main firmware upgrade procedure fail, and the switch
becomes unusable, the following firmware upgrade recovery procedure will
resolve the problem:
1. Power off the switch.
2. Press and hold the Reset Switch in (see reset button, page 13).
3. While holding the Reset Switch in, power the switch back on.
This causes the switch to use the original factory installed main firmware
version. Once the switch is operational, you can try upgrading the main
firmware again by logging on to the RCM Series of KVM Over IP Switch via
web browser (see Main Firmware Upgrade, page 202).
203