Table of Contents
Advertisement
USING YOUR COOKTOP'S SPECIAL FEATURES
If no pan is detected on one cooking zone:
The front cooking zone display will still show the selected temperature and the rear cooking
zone display will still show
If after 10 minutes no pan is detected:
the bridging function will switch off
z
the cooking zone without a detectable pan will continue to show
z
the remaining cooking zone will continue cooking at the selected heat setting.
z
Using Auto RapidHeat in bridged mode
1 Bridge the cooking zones.
2 Turn the control dial for the front cooking zone back past OFF to A.
3 Hold the dial at A until
4 Turn the control dial to your selected heat setting. the Heat setting and
in the display.
5 The bridged zone is now set for Auto RapidHeat.
To cancel bridging
Turn both control dials back to OFF.
.
starts alternating in the display.
will alternate
51
Advertisement
Table of Contents
