Fisher & Paykel OR90SCI4 Series User Manual page 50

USING YOUR COOKTOP'S SPECIAL FEATURES
Bridging SmartZones
The bridging zone function allows you to use two SmartZones together giving you a
z
larger cooking area. Your pan(s) will need to cover both cooking zones.
There may be a cooler area in the centre of the cooktop between the cooking zones. You
z
may need to move food around the pan to ensure even cooking.
When using bridging zones it is not possible to use the PowerBoost function.
z
Bridging zone
cooler
area
To select the bridging function
1 Place the pan on the cooktop over the two zones you wish to use, covering both
cooking zones (as shown above).
2 Press in and turn both dials for the selected cooking zones to
in the cooking zone displays and the displays stop flashing.
The front cooking zone display will show the heat setting.
z
The rear cooking zone will show
z
3 Use the front cooking zone control dial to adjust the heat setting for the bridged zone.
4 Adjusting the rear cooking zone will cancel bridging.
If no pan is detected
If no pan is detected on either cooking zone the front cooking zone display will alternate
between the selected setting and
50
.
. The rear cooking display will show
. Hold until appears
.