Table of Contents
Advertisement
ARRIVALS
Loading an Arrival into the Active Flight Plan
Loading an arrival into the active flight plan using the PROC Key:
1) Press the PROC Key. The 'Procedures' Window is displayed.
2) Highlight 'Select Arrival'.
3) Press the ENT Key. The 'PROC - Arrival Loading' Page is displayed.
4) Use the FMS Knob to select an airport and press the ENT Key.
5) Select an arrival from the list and press the ENT Key.
6) Select a transition (if required) and press the ENT Key.
7) Select a runway (if required) and press the ENT Key. 'Load?' is highlighted.
8) Press the ENT Key to load the arrival procedure
Loading an arrival into the active flight plan from the 'WPT -
Arrival Information' Page:
1) From the 'WPT - Airport Information' Page (first page in the WPT group),
press the STAR Softkey. The 'WPT - Arrival Information' Page is displayed,
defaulting to the airport displayed on the 'WPT - Airport Information' Page.
2) To select another airport, press the FMS Knob to activate the cursor, enter
an identifier/facility name/city, and press the ENT Key.
3) Select a different arrival, if desired.
a) Turn the large FMS Knob to highlight the arrival. The arrival is
previewed on the map.
b) Turn the small FMS Knob to view the available arrivals. Press the ENT
Key to select the arrival. The cursor moves to the 'Transition' Box (only
if there are available transitions). The arrival is previewed on the map.
c) Turn the small FMS Knob to view the available transitions. Press the
ENT Key to select the transition. The cursor moves to the 'Runway'
Box. The arrival is previewed on the map.
d) Turn the small FMS Knob to view the available runways. Press the ENT
Key to select the runway. The cursor moves to the 'Sequence' Box. The
arrival is previewed on the map.
4) Press the MENU Key to display the Arrival Information 'Page Menu'
Window.
190-02040-01 Rev. B
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Flight Management
71
Advertisement
Table of Contents
