Aux-Ads-B Status Page Messages For Ads-B Traffic - Garmin Beechcraft 200 Series Cockpit Reference Manual

Hide thumbs Also See for Beechcraft 200 Series:
Table of Contents

Advertisement

Annunciations & Alerts
TRFC FAIL
NO TRFC DATA
* Shown as symbol on Traffic Map Page
** Shown in center of Traffic Map Page

AUX-ADS-B STATUS PAGE MESSAGES FOR ADS-B TRAFFIC

ADS-B Status
Page Item
Message
Traffic Application
Status: Airborne
(AIRB), Surface
Available to
(SURF), Airborne
Alerts (CSA)
Not Available Traffic application is not available. Required input data is available,
Configured
---------------- Traffic application status is invalid or unknown.
TIS-B/ADS-R
Available
Coverage
Not Available The system is not receiving the ADS-R coverage from an FAA ground
--------------- ADS-R coverage is invalid or unknown.
GPS Status: GPS
External #1
Source
External #2
Ground Uplink
Number of
Status: Last
minutes, or
Uplink
190
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Traffic unit has failed (unit is self-reporting a failure or sending incorrectly
formatted data)
Data is not being received from the traffic unit
Status
On
Traffic application is currently on. Required input data is available,
and it meets performance requirements.
Traffic application is not currently active, but application is ready
Run
to run when condition(s) determine the application should be
active. Required input data is available, and it meets performance
requirements.
but it does not meet performance requirements.
Fault
Traffic application is not available. Required input data is not
available or the application has failed.
Not
Traffic application is not available, because it has not been
configured. If this annunciation persists, the system should be
serviced.
The system is receiving the ADS-R coverage from an FAA ground
station.
station.
The system is using the #1 GPS receiver for the GPS position source.
The system is using the #2 GPS receiver for the GPS position source.
---------
The GPS source is invalid or unknown.
Displays the number of minutes since the last uplink from a ground
station occurred. If no uplink has been received, or the status is
'------'
invalid, dashes appear instead of a number of minutes.
Description
190-02040-01 Rev. B

Advertisement

Table of Contents
loading

This manual is also suitable for:

Beechcraft b200 seriesG1000 nxi

Table of Contents