Additional Features
The display must be changed in order for the new setting to become active.
This may be accomplished by selecting another page or changing the
display range.
6) Press the FMS Knob when finished to remove the 'Charts Setup' Menu.
IFR/VFR CHARTS
The system can display GPS navigation information on a VFR chart, a low altitude
IFR chart, or a high altitude IFR chart, if installed. The information overlaid on the IFR/
VFR Charts is selected and setup on the Navigation Map, but the IFR/VFR charts will not
display some of the selected items.
Due to the potential error involved with the electronic depiction of maps, charts will
display a gray 'circle of uncertainty' centered upon the aircraft icon. The aircraft' s actual
position can be anywhere within the range of the gray circle. The range of the circle will
change based on the chart displayed and current zoom range.
Selecting IFR Low, IFR High, VFR Charts:
Select
1)
the 'Map - IFR/VFR Charts' Page.
Press
2)
the VFR
Modifying the IFR Low, IFR High, VFR Charts settings:
1) Select the 'Map - IFR/VFR Charts' Page.
2) Press the Map Opt Softkey to display the Map Options.
3) Press the Traffic Softkey to enable/disable traffic overlaid onto the charts
displayed.
SATELLITE TELEPHONE AND TEXT MESSAGING (SMS)
REGISTERING WITH GARMIN CONNEXT
A subscriber account must be established prior to using the Iridium Satellite System.
Before setting up an Iridium account, obtain the serial number of the Iridium Transceiver
(GSR1) and the System ID by selecting the 'Aux - System Status' Page. Setup can be com-
pleted by visiting www.flygarmin.com.
DISABLE/ENABLE IRIDIUM TRANSCEIVER
Disabling/enabling telephone and low speed data services:
1) Turn the large FMS Knob on the MFD to select the 'Aux' Page Group.
2) Turn the small FMS Knob to select the 'Aux - Telephone' Page.
148
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
,
, or
IFR Low
IFR High Softkey to display the desired chart.
®
190-02040-01 Rev. B