Table of Contents
Advertisement
Hazard Avoidance
Selecting 'cell' or 'strike' mode on the 'Map - Stormscope®' Page:
1) Select the 'Map - Stormscope®' Page.
2) Press the Mode Softkey. The Cell and Strike softkeys are displayed.
3) Press the Cell Softkey to display 'CELL' data or press the Strike Softkey to
display 'STRIKE' data. 'CELL' or 'STRIKE' is displayed in the mode box in the
upper right corner of the 'Map - Stormscope®' Page.
4) Press the Back Softkey to return to the top-level softkeys for the 'Map -
Stormscope®' Page.
ADDITIONAL STORMSCOPE DISPLAYS
Displaying Stormscope information on MFD navigation maps:
1) Press the Map Opt Softkey.
2) Press the STRMSCP Softkey.
Setting up Stormscope options on the 'Map - Navigation Map'
Page:
1) On the 'Map - Navigation Map' Page, press the MENU Key.
2) With 'Map Settings' selected, press the ENT Key.
3) Turn the small FMS Knob to display the group selection window. Turn the
small FMS Knob to select 'Weather', and press the ENT Key.
4) Turn the large FMS Knob to highlight and move between the product
selections.
5) When an item is highlighted, turn the small FMS Knob to select the option.
6) Press the ENT Key.
7) Press the FMS Knob to return to the 'Map - Navigation Map' Page.
Displaying Stormscope information on PFD maps:
1) On the PFD, press the Map/HSI Softkey.
2) Press the Lightning Softkey.
3) Press the STRMSCP Softkey.
4) Press the Back Softkey twice to return to the top-level softkeys.
Manually clearing Stormscope cell or strike information:
1) Select the 'Map - Stormscope®' Page.
2) Press the Clear Softkey.
106
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B
Advertisement
Table of Contents
