Surfacewatch Setup - Garmin Beechcraft 200 Series Cockpit Reference Manual

Additional Features
Inhibiting/uninhibiting SurfaceWatch:
1) Select the 'Aux - System Setup 1' Page.
2) Press the FMS Knob momentarily to activate the flashing cursor..
3) Turn the large FMS Knob to highlight the SurfaceWatch field .
4) Turn the small FMS Knob to toggle the SurfaceWatch alerts on or off .

SURFACEWATCH SETUP

Entering origin/destination airport:
1) Select the 'FPL - SurfaceWatch Setup' Page.
FMS
2) Press the
3) Turn the large
Airport field.
FMS
4) Use the
Selecting origin/destination runway:
1) Select the 'FPL - SurfaceWatch Setup' Page.
FMS
2) Press the
3) Turn the large
Runway field.
4) Turn the small
Runway. As the small
runway or landing runway is also displayed.
Selecting required takeoff/landing distance:
1) Select the 'FPL - SurfaceWatch Setup' Page.
FMS
2) Press the
3) Turn the large
REQD Landing DIS field.
FMS
4) Use the
pressing the
distance, the Runway Length field will turn amber if an insufficient runway
length exists.
164 Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Knob momentarily to activate the flashing cursor.
FMS
Knob if necessary to highlight the Origin or Destination
Knobs to input the desired Origin or Destination Airport.
Knob momentarily to activate the flashing cursor.
FMS
Knob if necessary to highlight the Runway or Landing
FMS
Knob to select the desired available Runway or Landing
FMS
Knob is turned, the preview of the selected
Knob momentarily to activate the flashing cursor.
FMS
Knob if necessary to highlight the REQD Takeoff DIS or
Knobs to enter the required takeoff or landing distance. Upon
FMS
Knob and committing the required takeoff or landing
190-02040-01 Rev. B