Registering Id Number; Registering Answerback Code - Furuno RC-1800F Service Manual

1) Registering ID number

1. Press [F5] key to open "Station" menu.
2. Press [9] key for a nine-digit ID(MMSI), or press [8] key for a five-digit ID number.
3. Enter the ID number and press [Enter] key twice for registration
Note) To change the ID number entered, display the ID number in step 2 and
type "ID CODE" in Caps-Lock (capital letters), then enter a new ID
space
number.

2) Registering answerback code

1. Press [F5] key to open "Station" menu. Refer to Fig. 2.1.8.
2. Press [5] key.
3. Enter an answerback code and press [Enter] key twice to register the answerback
code.
The configuration of an answerback code shall be "MMSI (nine-digit
number)+four letters+X".
Note) To change a registered answerback code, display the answerback code in
step 2, and type "ANSWER
After the answerback code has been deleted, register a new answerback code.
Station
1: Station Entry
2: Timer Operation Entry
3: Scan Entry
4: User Channel Entery
5: Answerback Code Entry
6: Group ID Entry (4/5 digit)
7: Group ID Entry (9 digit)
8: Select ID Entry (4/5 digit)
9: Select ID Entry (9 digit)
Fig.2.1.8
CODE" in Caps-Lock (capital letters).
space
2-16
2.1 MF/HF (150/250W) system
Answerback code
ID number