Subscribe to Our Youtube Channel
Related Manuals for Furuno P4800
Summary of Contents for Furuno P4800
- Page 1 Furuno RO4800 VHF Marine Radio Furuno P4800 Wireless Microphone Furuno Draft Ver: V2.0, date: NOV 12, 08 Prepare by: IDT...
- Page 3 MOB SETUP 7.4.3 GPS REDIR P4800...
- Page 4 Furuno RO4800 P4800...
- Page 6 & in USA brand FAVORITE...
- Page 7 RO4800 RO4800...
- Page 9 WALL RUBBER PAD M5X10 M5X32 Fig: 3.6 Mounting The Handset Fig: 3.7 Recessed Installation...
- Page 10 Hold down the Cancel/IC button until the LCD appears the...
- Page 11 FURUNO...
- Page 12 ,Press advance Press then knob...
- Page 13 select CALL BACK the follow select CALL BACK the follow...
- Page 14 POSITION REQ FROM CANCEL EXIT...
- Page 15 by pressing the CH knob by pressing...
- Page 16 of POS and Time, Time offset, , Band rate setting and GPS REDIR selecting Subscribe to link the MOB,and display the MOB state MOB SET UP to pop up on...
- Page 17 Select LOCAL/DIST then scroll to LOCAL,press the CH knob. on it’s LCD POSITION!!
- Page 18 CH NAME DISPLAY NAM...
- Page 20 DSC ENABLE 6.12 MOB SET UP Register your MOB to the base unit, and you can review the MOB is ON/OFF status by this menu.Please ref. to chapter 9.
- Page 21 Furuno Furuno radio RO4800...
- Page 22 FURUNO BAUD RATE...
- Page 23 MOB SETUP 7.4.3 BAUD RATE . The User can choose between output the AIS data in 4800 or 38400 default setting is 38400. 1. Select MENU SELCET,then AIS SETUP. 2.Select BAUD RATE,the cursor is at 38400(Which is the default setting),Select your desired then press the CH knob to confirm your choice.
- Page 24 1.Select MENU SELCET,then AIS SETUP. 2 . Select GPS REDIR the cursor is at NO select your desired then press the CH knob to confirm your choice. P4800 P4800 FURUNO FURUNO...
- Page 26 P4800 FURUNO the radio unit. DSC SETUP AIS SETUP HS SETTING MENU SETUP DSC SETUP AIS SETUP CODE WAITING...
- Page 27 Press HI/LO /SCAN During scan press HI/LO /SCAN DSC/MENU HI/LO /SCAN scroll During watch mode ,again press to turn back watch mode. To...
- Page 29 RO4800 Reset by removing the batteries for around 30 seconds. Abnormal or No display on Wireless Handset. This will return the unit to the default settings.
Need help?
Do you have a question about the P4800 and is the answer not in the manual?
Questions and answers