Table of Contents
Advertisement
Registration of
MMSI
System setting
Position display
SCAN setting and
scan operation
REMOTE
operation
Selftest
Program version
Connection to
printer
Power interlock
function
Check items
DSC-60
MMSI has been correctly registered?
Method of registering MMSI
→
"NMI SW" ON
→
CLEAR
Enter MMSI.
The necessary system setting has been made?
Method of system setting
→
[SETUP]
Select "SYSTEM"
→
"Set"
Note) When FS-2550/1562 is fitted, set "REMOTE
STATION" to "ON" without fail.
Position data from GPS is entered?
Set the scanning frequencies: SCAN/[SETUP].
It is recommended to use the international frequency as
ROUTINE frequency.
When "SCAN" key is pressed, the transceiver starts
scanning at the ROUTINE frequencies?
When "REMOTE STATION" is set to "ON", is it possible
to set the frequency, emission mode, and sound
volume
of
the
communications?
The results of the selftest are OK?
The program version has been checked?
To check the version:
During the selftest, press [1: RT] key five times while
holding down [FILE] key.
Is the result of the selftest printed? If the printing does
not work automatically, check "PRINT" setting in the
[SETUP] menu.
Turn off MF/HF transceiver and DSC-60.
When the DSC-60 is turned on, the MF/HF transceiver
comes on?
→
Enter "652111"
→
Enter "652111"
transceiver
and
5-4
5.1 Check list
Table 5.1.4
Results
Select MMSI
to
make
Advertisement
Table of Contents
