Bosch Digital Congress Network Installation And Operating Manual page 81

Digital Congress Network | Installation and Operating Manual | Chapter 5 - Control using PC
Table 5-10: DCN Printer and COM-ports for systems using PC-control with PC-Network card LBB 3510/00 (see
LASER PRINTER
LPT -1 (IRQ=7)
SOFTWARE PACKAGE Windows® Print Manager
LBB 3590 Startup
LBB 3585 System
Installation
LBB 3571 Synoptic Micro-
phone control
LBB 3570 Microphone
Management
LBB 3580 Delegate
Database
LBB 3575 Parliamentary
Voting
LBB 3572 Simultaneous
Interpretation
LBB 3573 Intercom
switching
LBB 3578 Attendance
Registration
Bosch Security Systems | 04-2003 | 3922 988 43318 en
MATRIX PRINTER
COM 1 (IRQ = 4)
= ASCII + CR + LF
Error messages
*1
Printing
Seat numbers
Printing
Channel assignment
Printing
*2
Microphone activity
List Printing
Microphone activity
*2
List Printing
*4
Database
List Printing
Voting file total* and individual*
Printing
* Depends
on which-
(Real-time) Post-voting
mode
total* and individual*
selected
Printing
Desk language assignment
Auto Printing
Channel language assignment
Printing
File
Printing
List Registration
Printing
File Registration
Printing
Get other manuals https://www.bkmanuals.com
Chapter 5.7
CARD ENCODER/ AUX.- INTERFACE
COM 2 (IRQ=3)
= ASCII + CR + LF
Error logging
Real-time
Sent to Auxiliary
*3
Microphone activity Microphone activity
Real-time Printing Real-time to Aux. (Camera ctrl.)
Microphone activity Microphone activity
*3
Real-time Printing Real-time to Aux. (Camera ctrl.)
Label printing Microphone activity
*5
Card encoder
For COM and LPT cable connections, refer to
LPT1 Default settings
COM 1 and COM 2
8- bit standard Baud-rate = 9600
Data-bits = 8
Parity = None
Flow control = None
* Change default COM-port assignments. (This can only be done in the
dcn.ini file located in the 'Window® directory)
** Change COM-port settings: (Using the Port program found in the
Windows Control Panel. Only applicable for Micactlogging)
* 1 Not possible *1 [Errorlogging]
Comport=2
* 2 Not possible
*2 [MicActlogging]
* 3 Not possible
Prt-port=2
* 3 Not possible *3 [MicActlogging]
Comport=1
* 4 Not possible
** Baudrate - 19200
* 5 Not possible
*4 [Label printing]
Comport=2
*5 [CardEncoding]
Comport=1
Software configuration Master CCU PC (OS/2) (Serial Ports 1 and 2)
and Chapter 5.8)
FIG 5-9
en | 5-11
2