Pressure Tightness; Solids Contents; Additional Technical Data - Endress+Hauser Liquiphant FTL63 Density Operating Instructions Manual

Liquiphant FTL63 Density
Endress+Hauser
WARNING
L
The maximum pressure for the device depends on the lowest-rated element, with
regard to pressure, of the selected component. This means that it is necessary to pay
attention to the process connection as well as the sensor.
‣
Pressure specifications,
‣
Only operate the device within the specified limits!
‣
The Pressure Equipment Directive (2014/68/EU) uses the abbreviation "PS". The
abbreviation "PS" corresponds to the MWP (maximum working pressure) of the device.
15.4.4

Pressure tightness

Up to vacuum
15.4.5

Solids contents

⌀ ≤ 5 mm (0.2 in)
15.5

Additional technical data

Current Technical Information: Endress+Hauser website:
Downloads.
Technical Information, "Mechanical construction" section.
Technical data
www.endress.com →
35