Product Design; Incoming Acceptance And Product; Identification; Incoming Acceptance - Endress+Hauser Liquiphant FTL63 Density Operating Instructions Manual

Liquiphant FTL63 Density
Endress+Hauser
3.1

Product design

5
 1 Liquiphant FTL63 product design
1 Housing with electronic insert FEL60D and cover
2 Temperature spacer, pressure-tight feedthrough (second line of defense), optional
3 Process connection, e.g. clamp/Tri-Clamp
4 Process connection, e.g. thread
5 Compact probe version with tuning fork
6 Pipe extension probe with tuning fork
7 Short pipe version of probe with tuning fork
4

Incoming acceptance and product

identification

4.1

Incoming acceptance

Check the following during incoming acceptance:
 Are the order codes on the delivery note and the product sticker identical?
 Are the goods undamaged?
 Do the data on the nameplate match the ordering information on the delivery note?
 If required (see nameplate): are the Safety Instructions e.g. XA provided?
If one of these conditions is not met, please contact the manufacturer' s sales office.
Incoming acceptance and product identification
1
2
3 4
6 7
A0052411
9