Proline Promag P 200
Pressure tightness
Flow limit
Pressure loss
System pressure
Endress+Hauser
Liner: PFA
Nominal diameter
[mm]
[in]
25
1
32
–
40
1 ½
50
2
65
–
80
3
100
4
125
–
150
6
200
8
Liner: PTFE
Nominal diameter
[mm]
[in]
+25 °C (+77 °F)
15
½
25
1
32
–
40
1 ½
50
2
65
–
80
3
100
4
125
–
150
6
200
8
The diameter of the pipe and the flow rate determine the nominal diameter of the sensor. The optimum velocity
of flow is between 2 to 3 m/s (6.56 to 9.84 ft/s). Also match the velocity of flow (v) to the physical properties
of the fluid:
• v < 2 m/s (6.56 ft/s): for abrasive fluids (e.g. potter's clay, lime milk, ore slurry)
• v > 2 m/s (6.56 ft/s): for fluids producing buildup (e.g. wastewater sludges)
For an overview of the measuring range full scale values, see the "Measuring range" section (® ä 5)
• No pressure loss occurs if the sensor is installed in a pipe with the same nominal diameter.
• Pressure losses for configurations incorporating adapters according to DIN EN 545 (® ä 20)
• Never install the sensor on the pump suction side in order to avoid the risk of low pressure, and thus damage
to the liner.
• Furthermore, install pulse dampers if reciprocating, diaphragm or peristaltic pumps are used.
• For information on the liner's resistance to partial vacuum (® ä 25)
• For information on the measuring system's resistance to vibration and shock (® ä 22), (® ä 22)
Limit values for absolute pressure in [mbar] ([psi]) for fluid temperatures:
+25 °C (+77 °F)
+80 °C (+176 °F)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
Limit values for absolute pressure in [mbar] ([psi]) for fluid temperatures:
+80 °C (+176 °F)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
– (–)
0 (0)
– (–)
0 (0)
– (–)
135 (1.96)
– (–)
135 (1.96)
– (–)
200 (2.90)
– (–)
+100 to +180 °C (+212 to
+356 °F)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
0 (0)
– (–)
0 (0)
– (–)
0 (0)
– (–)
0 (0)
– (–)
0 (0)
– (–)
0 (0)
– (–)
0 (0)
+100 °C (+212 °F)
+130 °C (+266 °F)
0 (0)
100 (1.45)
0 (0)
100 (1.45)
0 (0)
100 (1.45)
0 (0)
100 (1.45)
0 (0)
100 (1.45)
40 (0.58)
130 (1.89)
40 (0.58)
130 (1.89)
135 (1.96)
170 (2.47)
240 (3.48)
385 (5.58)
240 (3.48)
385 (5.58)
290 (4.21)
410 (5.95)
25
Need help?
Do you have a question about the Proline Promag P 200 and is the answer not in the manual?
Questions and answers