Firmware System Mitel Sip-Dect - Mitel MIVOICE OFFICE 400 415 Manual

loaded firmware is not identical to the version in the system software, the firmware will
be downloaded from the communication server on to the radio unit and stored in the
Flash memory of the radio unit.
Cordless DECT phones of the Mitel 600 DECT family
The firmware for the Mitel 600 DECT cordless phones, is updated via radio (Air-Down-
load). The update can be enabled or disabled individually for each cordless phone us-
ing the menu System
is logged on to several systems, this menu defines which system the firmware update
is relevant to.
There is only one firmware for the cordless Mitel 600 DECT series phones. It is in-
cluded in the MiVoice Office 400 application software package and stored in the file
system of the communication server.
DECT cordless phones Office 135 and Office 160
The firmware for the Office 135 and Office 160 cordless phones, is updated via radio
(Air-Download). This requires the cordless phone to be logged on to system A.
The memory in the cordless phones is a Flash memory. The Flash memory contains an
area that cannot be modified. This area contains the cordless phone's boot software.
The firmware for the cordless phones is contained in the MiVoice Office 400 application
software package. The loaded firmware is tested when the cordless phone starts up. If
the loaded firmware is not identical to the version in the system software, the system
will initiate an Air-Download. The firmware is loaded from the communication server
onto the cordless phones via radio and stored in the Flash memory.
To be able to run an Air-Download, you need to ensure that the cordless phone con-
tains a functional firmware.
The cordless phone remains fully functional during an Air-Download. The new loaded
firmware is activated only once the Air-Download has been successfully completed. A
restart is carried out on the cordless phone.
6. 2. 4

Firmware System Mitel SIP-DECT

With Mitel SIP-DECT and Mitel 600 DECT series phones comprehensive solutions can
be provided for wireless telephony on IP-based networks. This requires RFP radio
units that can be directly connected to other VoIP devices on the LAN.
OpenMobilityManager (OMM) is installed on one of the RFP radio units or on a PC,
which constitutes the management interface for the Mitel SIP-DECT solution.
Mitel 600 DECT phones have loaded a different firmware in an Mitel SIP-DECT system
from the one in an MiVoice Office 400 DECT system.
Mitel 415/430
syd-0580/2.1 – R6.1 – 06.2019
- Download server
Operation and Maintenance
on the cordless phones. If the cordless phone
185