Enerzone Solution 1.6 Installation And Operation Manual page 30

CONSTRUCTIONS AND CLEARANCES FACTORS FOR APPLIANCES HEAT SHIELDS
HEAT SHIELD CONSTRUCTIONS
Single layer of continuous material
Single layer of continuous material
NOTES:
1- Masonry may be used as a heat shield material.
2- Where heat shields are used to reduce appliance clearance dimensions, additional flue
shielding may also be required. Refer to AS/NZS 2918:2001.
30
WHICH ARE MORE THAN 45
o
OFF THE VERTICAL
Minimum air gap
dimensions (mm)
12
25
Solution 1.6 Installation and Operation Manual
Clearances factor
0.80
0.60