Table of Contents
Advertisement
BHT-M70 Series
5.2.2 Data/Image Capture
Cameras
Code Reader
HF RFID Reader
5.3 Electrical Characteristics
5.3.1 Batteries
Battery
Sub Battery
5.3.2 Working Time
3050mAh BT3
Note
Operation time is a reference value under normal temperature and varies according to the use
conditions.
It is measured based on JEITA HT standard operating mode G and varies according to the
operating environment and system settings.
Rear Camera 13-Mega pixels.
2D Imager
ISO14443A/B (Mifare), ISO15693 (Felica)
Supports NFC (P2P, Card reader, Card emulation)
Perform a sufficient reading test with a card to be used preliminarily.
Rechargeable Li-ion battery: 3.6 V, 3050 mAh BT3
Charging temperature: 0 ° to 40 ° C
Minimum charging time 3050mAh: 3 hours at 25 ° C
Please charge batteries from 0 ° to 35 ° C in temperature. To ensure
that the battery is being charged under a safe condition, battery
disable charging when ambient temperature drops below 0 ° C or
exceeds 40 ° C, and resume charging after its temperature returns
within the acceptable range.
Data retention for 5 minutes
Charging time: 10 minutes
Approximately 20 hours.
50
Advertisement
Table of Contents
