Denso BHT-M70 Hardware User Manual page 30

Barcode/2d code handy terminal

Hide thumbs Also See for BHT-M70:

Table of Contents

2 Using BHT-M70

2.1 Battery

Battery

BHT is powered by rechargeable Li-ion battery pack. It takes approximately 3 hours at 18 ° C to 35 ° C

ambient temperature to charge them to full using the Communication Unit with AC adaptor or the

charger. However, the charging time may vary by your working condition.

Sub Battery

Settled on the main board is a sub battery that is used to protect data of BHT when the battery is

replaced. Replace the battery within 5 minutes. When the sub battery is charged by the battery or the

power adapter, it takes approximately 10 minutes from the completely discharged state to the fully

charged state.

Caution:

For a new battery, make sure it is fully charged before using.

Barcode / 2D Code Handy Terminal

Table of Contents