Electrical Characteristics - Denso BHT-1800 Series Hardware User Manual

4.2.2 Data/Image Capture
Cameras
Code Reader
HF RFID Reader

4.3 Electrical Characteristics

4.3.1 Batteries
Main Battery Pack
Backup Battery
4.3.2 Working Time
WWAN model
WLAN model
8-Mega pixels, 5-Mega pixels (optional)
2D Imager
ISO14443A/B (Mifare), ISO15693 (Felica)
Supports NFC (P2P, Card reader, Card emulation)
Perform a sufficient reading test with a card to be used preliminarily.
It is not recommended to read the IC driver ' s license.
(DENSO WAVE has already checked and evaluated that a part of
driver ' s licenses are not readable.)
Rechargeable Li-ion battery: 3.85 V, 2900 mAh
Charging temperature: 0 ° to 40 ° C
Minimum charging time: 4 hours at 25 ° C
Please charge batteries from 0 ° to 35 ° C in temperature. To ensure
that the battery is being charged under a safe condition, battery
disable charging when ambient temperature drops below 0 ° C or
exceeds 40 ° C, and resume charging after its temperature returns
within the acceptable range.
Rechargeable nickel-hydrogen battery: 3.6 V, 6 mAh
Data retention for one minute
Charging time: 10 hours
Supports working time for up to 12 hours at 25 ° C.
Supports working time for up to 24 hours at 25 ° C.
41
Barcode / 2D Code Handy Terminal