Table of Contents
Advertisement
BHT-M70 Series
2.4 Notifications
2.4.1 Status Indicator
Status indicator located above the touch screen provide information about charging status, scanner
light beam, and scanner " Good Read " during data collection.
Action
Charging
Barcode decode
BHT is on sub battery
power.
(The battery cover is
removed.)
Note: To enable the notification of barcode decode, it must be turned on in the Reader Configuration.
2.4.2 Audio
The speaker is used to play sounds for events in windows and programs, or play audio files. In
addition, it can be programmed for status feedback. BHT also supports using Bluetooth
If the optional USB Type-C to Audio conversion cable is used, a headset with a 3.5 mm audio jack can
be also used.
Supported audio file formats include: WAV, MP3, AAC, AAC+, Enhanced AAC+, AU (including
ADPCM), Midi, XMF, AMR (NB and WB).
Use the volume buttons on the side of BHT to adjust the system volume.
Status
Description
indication
Blue, solid
Charging complete
Red, solid
Charging BHT
Red,
Charging error (for instance, battery not in place)
blinking
Blue,
Good read
flash once
Upon the removal of the battery cover, the red light is
on for a while and then goes off to signal that the
Red, solid
battery is ready to be removed. Please refer to Hot
Swap to perform a successful battery swapping.
40
headsets.
®
Advertisement
Table of Contents
