Jeep AVENGER 2023 Owner's Handbook Manual page 62

smartphone applications to be used on
the touch screen. For best results, use
a cable made or approved by the device
manufacturer. These applications can
be managed using the steering-mounted
controls or the audio system controls.
NOTE The sockets must always be kept
clean and dry.
111
112
60
Rear USB port
(where provided)
113
The car can be equipped with an
USB-C (charge only) socket fig. 113 for
charging the connected device.
NOTE The sockets must always be kept
clean and dry.
JJ000491
INDUCTIVE CHARGING
(where provided)
64) 65)
28)
This system allows wireless charging of
a portable device such as a smartphone,
using the magnetic induction principle,
in accordance with the Qi 1.1 standard.
JJ000552
The portable device to be charged must
be compatible with the Qi standard,
either by design or by using a compatible
holder or shell.
A mat can also be used provided that it
is approved by the Manufacturer.
The charging area is identified by the Qi
symbol.
The charger works with the engine
running and with the Stop-Start system
deactivated.
Charging is managed by the smartphone.
With the Electronic key system, the
charger's operation may be briefly
disrupted when a door is opened or the
ignition is switched off.
WARNING To avoid the damage or cut
of the inductive charging surface, do not
place on the surface objects with pointy
JJ000494
and/or sharp edges or, anyway, objects
different from a mobile phone.
WARNING The system is not designed to
charge multiple devices simultaneously.
WARNING Do not place contactless
cards (RFID), credit cards or metal
objects in the charging compartment.
The presence of an active NFC function
on a smartphone could signal a
malfunction.
WARNING Not all mobile phone covers
guarantee the correct charging of
the phone. Check that charging is in
progress after having placed the phone in
the charging compartment.