Table of Contents
Advertisement
302
299)
131)
PRESCRIPTIONS FOR FULL
ELECTRIC VERSIONS
303
The electrical circuit of the Full Electric
vehicle is identified by orange cables
and its components are marked with the
symbol fig. 303.
300) 301) 302) 303)
CHECKING LEVELS
Check all of the following levels regularly
in accordance with the manufacturer's
service schedule. Top them up if
required, unless otherwise indicated.
If a level drops significantly, have the
corresponding system checked by a
dealer or a qualified workshop.
304) 305) 306) 307) 308) 309)
132) 133)
Used products
310)
JJ000636
7)
Engine oil
134)
Check the engine oil level manually
on a regular basis to prevent damage
to the engine. Ensure that the correct
specification of engine oil is used.
The maximum engine oil consumption is
0.6 l per 1000 km.
Check with the vehicle on a level
surface. The engine must be at operating
temperature and switched off for at least
5 min.
JJ000649
304
Pull out the dipstick, wipe it clean,
reinsert it fully, pull out and read the
engine oil level fig. 304.
Check that the oil level is between the
MIN and MAX references on the dipstick.
When the engine oil level has dropped
to the MIN mark, top up the engine oil
through the oil filler (1) fig. 304.
We recommend the use of the same
grade of engine oil that was used at last
change.
The engine oil level must not exceed the
MAX mark on the dipstick.
135)
Fit the cap on straight and tighten it.
Engine coolant (Petrol engines)
It is normal to top up this fluid between
two services.
The check and top-up must only be done
with the engine cold.
A level of coolant that is too low risks
causing major damage to the engine.
Open the cap (2) fig. 305. The coolant
JJ000530
227
Advertisement
Chapters
Table of Contents
