Jeep AVENGER 2023 Owner's Handbook Manual page 275

Select the desired contact in the
displayed list.
Call the contact by selecting one of
the contact's phone numbers pressing
the button.
Organising the contact list
Press the "Phone" application.
In the list, select the "Settings" tab to
display the telephone-related settings.
Choose to list the contacts starting
with their first or last name.
Connecting two phones
NOTE The system allows two phones
to be connected simultaneously: 2
via Bluetooth® connection or 1 via
Bluetooth® connection and 1 via Mirror
Screen® connection. Display and
content priority is given to the last phone
used.
To change the priority of the phone:
Press the "Phone" application.
Press the button to change the
priority of the phone.
VOICE ASSISTANT (HEY JEEP)
First steps
(depending on equipment)
The Voice Assistant language is in line
with the language chosen and previously
configured in the system.
The system supports two languages
for cases where the area in which the
vehicle is travelling is not covered by the
cellular network.
These languages, referred to as on-board
languages, are downloaded into the
system.
If the chosen language has not been
downloaded, a message on the screen
appears as soon as the cellular network
is not connected for the first time and
offers to download it. To use this new
language in all areas, download it
beforehand (ignition on without starting
the engine) via the Wi-Fi network. Apply
the download procedure displayed on the
screen. Downloading this new language
removes the least used on-board
language.
Information - Using the system
When voice commands are activated, say
your command after the audible signal.
For commands in several stages,
interaction takes place with the system
to complete the initial request.
Some commands self-validate after 7
seconds. If the system has not taken
your command into account, it will
indicate this by a voice message and an
on-screen display.
Opening Voice Assistant
Voice commands can be used on any
screen page, provided there are no
other sources which take priority in use
(reverse, emergency or assistance call,
telephone call, other smartphone voice
recognition already launched).
The Voice Assistant can be activated by
pressing the button located on the
steering wheel or on the touch screen or
by saying "Hey Jeep".
NOTE To ensure that voice commands
are always recognised by the system,
please follow these recommendations:
use natural language in a normal tone
without breaking up words or raising
your voice. After opening the Voice
Assistant with the button on the steering
wheel or the touch screen button,
always wait for the "beep" (sound
signal) before speaking. For optimal
operation, it is recommended that you
close the windows and the sunroof
(depending on equipment) to avoid any
external interference, and switch the
ventilation off. Before speaking the voice
commands, ask the other passengers not
to speak.
Voice command examples for air
conditioning:
"Raise the fan speed"
"Turn on air conditioning"
"I'm too hot"
Voice command examples for radio and
media:
"I want to listen to Michael Jackson"
"Switch to radio"
"Tune to 88.5"
NOTE Media voice commands are only
available with a USB connection.
Voice command examples for navigation:
"Navigate home"
273