Table of Contents
Advertisement
USING SETUP MODE
OVERVIEW OF
SETUP MODE (LCD)
MENU1 and MENU2
HARDWRE
ADJUST
CONFIG
GAP-ADJ
SUB FUNCTION
SELFDIAGNOSTIC SELF-TST
PRINTING A LIST OF
SELECTED
OPTIONS(LCD)
5-15
User's Manual
Available functions of LCD types SETUP MODE are as follows.
Table 5.2 summarizes the purpose of each function.
Table 5.2 Setup Mode Functions(LCD)
Function
SAVE&EXIT
LIST
DEFAULT
INITIAL
HEX-DUMP
V-ALMNT
Detail of selecting items and options are almost same as LED type.
General difference of LCD type SETUP MODE is only SETUP method.
The LIST function prints a list of all the printer's currently selected
options. This function is useful for checking the printer settings when
you first enter setup mode or just before you exit. To print a list of
options, load paper A4 size or more in advance and select list function.
NOTE
If paper runs out only LOAD button is available.
Purpose
Assigns print features to MENU1 and MENU2 on
the printer control panel.
Changes the printer hardware options.
Changes the print position adjustment options.
Changes the configuration options.
Adjust the gap between the print head and printing
paper.
Exits setup mode and saves any changes made
while in setup mode.
Prints a list of all currently selected options.
Resets factory defaults in MENU1 and MENU2.
Resets factory defaults in MENU1, MENU2,
HARDWRE, ADJUST, CONFIG, GAP-ADJ.
Runs the self-test.
Prints hex dumps.
Checks and corrects vertical print alignment.
USING SETUP MODE
User's Manual
5-15
Advertisement
Table of Contents
