Table of Contents
Advertisement
PAPER HANDLING
Lock Lever
3-25
User's Manual
4. Adjust the left margin.
Below the left tractor, there is a tractor guide, short inch-based
ruler graduated in 10 columns per inch. Use the ruler to help
position the tractor. When the paper edge is positioned to the
zero line, the left margin is 12 mm (0.5 inch) including
perforation area and the arrow indicates the location of the first
character.
5. Pull the right tractor to stretch the paper taut. Push the right
locking lever down to secure the tractor in place.
6.
Press the PAPER PATH button to select REAR TRACTOR (the
indicator lights).
7. Press the LOAD button to advance the paper to the top-of-form
position. Top-of-form is the first line on which printing can
start. After loading paper, the printer goes into online mode.
8. Print a sample page and check the page margins. Make the
following adjustments, as necessary:
Horizontal alignment. Move the forms tractors as required.
•
Top-of-form setting (see Chapter 5).
•
Margin settings. Use your software or the printer setup
•
mode (see Chapter 5).
PAPER HANDLING
Lock Lever
User's Manual
3-25
Advertisement
Table of Contents
