Fujitsu Impact 4550 PRO User Manual page 156

USING SETUP MODE
5-54 User's Manual
Table 5.7 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG Options
Items
<FCNT-PE>
TRACTOR
EDGE
<RCNT-PE>
TRACTOR
EDGE
USING SETUP MODE
Description
Detection of end of front continuous
forms.
Paper end is detected by the sensor
on the tractor unit.
Paper-end unprinted area:
Continuous forms: About 101 mm
Regardless of paper end, printing
continues near to the edge of paper.
Paper-end unprinted area: About 4
mm for both continuous forms
Detection of end of rear continuous
forms.
Paper end is detected by the sensor
on the tractor unit.
Paper-end unprinted area:
Continuous forms: About 157 mm
Regardless of paper end, printing
continues near to the edge of paper.
Paper-end unprinted area:
About 4 mm for both continuous
forms
User's Manual 5-54