Table of Contents
Advertisement
PRINTER MODELS
AND OPTIONS
4
User's Manual
ABOUT THIS MANUAL
Thank you for buying the GLOBALIS Imapct4550 pro dot matrix
printer. You can expect years of reliable service with very little
maintenance. This manual explains how to use your printer to full
advantage. It is written for both new and experienced printer users.
This manual describes how to install, set up, and use your printer and
printer options. It also explains how to keep the printer in good working
condition and what to do should something go wrong. Detailed
procedures are provided for first-time users. Experienced users can skip
some of the details, using the table of contents and chapter introductions
to locate information.
This manual has several appendixes, a glossary, and an index. Appendix
A lists supplies and additional documentation and information available
from your dealer or authorized GLOBALIS representative. GLOBALIS
offices are listed at the end of the manual.
This manual covers model Ultima 90+, a 136-column printer. Each
model has a 100-120 (M33335A) V or 220-240 (M33335B) V power
supply.
A LAN card, a user add-on option, can be installed only on printer
models with the Centronics parallel + USB interfaces. You must specify
these when purchasing the printer.
Other options include a cut sheet feeder can be added by yourself after
purchasing the printer.
Impact4550 pro
Basic specifications
Print line at 10 cpi: 136 columns (Ultima 90+)
Control Panel: LED type
LCD type
Interface: Centronics parallel + RS-232C
Centronics parallel + USB + LAN (LAN user option)
Alternative specification
Power supply:
User add-on option
LAN card
Cut sheet feeder
Tractor unit
Sound proof cover
Large Stacker
Small paper table
100-120 V (M33335A)
220-240 V (M33335B)
4
User's Manual
4
Advertisement
Table of Contents
