Table of Contents
Advertisement
USING SETUP MODE
5-32
User's Manual
Table 5.4 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
Underlined options are the factory defaults.
•
Asterisks identify items and options that differ for the IBM XL24E
•
and Epson ESC/P2 emulations. The notes are defined at the end of
the table.
MENU1 and
Options
MENU2 Items
<DC3-CDE>
ENABLE
(*4)
DISABLE
<CR-CODE>
CR ONLY
CR & LF
<LF-CODE>
LF ONLY
(*2)
LF & CR
Note
The default value of <LF-CODE> changes with the selected emulations as
follows.
"LF&CR" is a default value in the DPL24C+ emulations.
"LF ONLY" is a default value in the XL24E emulations.
USING SETUP MODE
Description
Enables the DC1 and DC3 codes.
Any data received between DC3 and the
next DC1 is ignored.
Disables the DC1 and DC3 codes. These
codes are then ignored.
No line feed is added to a carriage return.
A line feed is added to each carriage return.
No carriage return is added to a line feed.
A carriage return is added to each line feed.
User's Manual
5-32
Advertisement
Table of Contents
