Table of Contents
Advertisement
USING SETUP MODE
5-40
User's Manual
Table 5.5 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Options
Items
<PROTOCL>
XON/XOF
DTR
REV-CHL
<DSR>
DETECT
IGNORE
<DUPLEX>
FULL
HALF
<CTS>
DETECT
IGNORE
<CD>
DETECT
IGNORE
<==END==>
USING SETUP MODE
Description
Indicates data transmission protocol.
The DC1 and DC3 codes are used.
The Data Terminal Ready signal is used.
The Reverse Channel signal is used.
DSR is detected by the printer.
DSR is ignored by the printer.
Simultaneous data transmission occurs in
opposite directions.
Data transmission occurs in either direction,
but not simultaneously.
CTS is detected by the printer.
CTS is ignored by the printer.
CD is detected by the printer.
CD is ignored by the printer.
(LED only)
Indicates the end of the HARDWRE item
list. Press the
button to print the first item,
which is <PPR-OUT>.
Press the
button to print the previous item.
Press the ONLINE button to reprint the
<<FUNCTION>> menu.
User's Manual
5-40
Advertisement
Table of Contents
