ADJ ELE600 User Instructions page 20

B AT T E R Y: R E P L A C E M E N T
3. With the display screen panel removed,
the blue colored battery should be
plainly visible. Locate the two white
wires that run from the battery and link
to a red wire and a black wire via a
small white connector. Disconnect the
connector, then remove the battery and
replace with a new unit.
4. Reassemble the device by re-connect-
ing the wire connector, then placing
the display screen panel back in place.
Please make sure that the gasket is
fully seated around the edge of the
panel. Replace the panel screws, and
torque to 3.6 lb-in (4.2 kg-cm).
20
Control
Panel
Gasket