Table of Contents
Advertisement
Using the Probe
■
Refer to "Proper Handling Techniques" on page 5
before using the probe for the first time.
■
Refer to "Calibrating the Probe" on page 9
brate the test setup for use with the probe.
C A U T I O N
C A U T I O N
Electrostatic discharge (ESD) can damage or destroy
electronic components and the input circuits on plug-
in modules. Coaxial cables with both ends
unconnected may store electrostatic charges. Before
connecting any coaxial cable to a device or
instrument, momentarily short the center and outer
conductors of the cable. When making connections,
ensure the proper use of a grounded, resistor-isolated
wrist strap.
Before connecting the phase-matched cables, always
discharge any static buildup. Momentarily short the
center and outer conductors of the cable together.
Avoid touching the front-panel input connectors
without first touching the frame of the instrument.
to cali-
3
Advertisement
Table of Contents
