Table of Contents
Advertisement
use a 5 in-lb (0.56 Nm) torque wrench.
■ Before cleaning the external case parts of the
N1021B, disconnect the probe from all cables. Use
a dry cloth or one slightly dampened with a mild
soap and water solution. Do not attempt to clean
internally.
C A U T I O N
C A U T I O N
6
Applying excessive force when handling the probe can
result in bent or otherwise damaged probe tips. Apply
only enough pressure to ensure a secure connection.
The probe tips are spring loaded. Avoid fully
compressing the probe-tip springs. The probe tips are
not replaceable.
Do not use too much liquid in cleaning the probe.
Water can enter the case.
Advertisement
Table of Contents
