Attaching To A Positioner - Agilent Technologies N1021B User Manual

Attaching to a Positioner

The supplied adapter allows you to attach the probe
to the N1020A TDR Probe positioner, as well as many
robotic arms and common industry positioners. Two
M2.5 socket-head screws (6 mm long) and an Allen
wrench are provided to attach the adapter to the
N1021B. The two screw holes on the probe are sepa-
rated by ¼-inch (6.4 mm) on center. Torque each
screw to 5 in-lb (0.56 Nm). A ¼-inch hole in the
adapter is used to attach the adapter to the posi-
tioner.
8