Safety Labels - Huawei ATN 950B Hardware Description

ATN 950B Multi-service Access Equipment
Hardware Description
The equipment has various safety labels. This section describes the suggestions and locations
of these safety labels.
Label Description
There are labels on the chassis and boards. See
Table 10-1 Label description
Figure
!
Issue 03 (2012-07-23)
Type
ESD protection label
Chassis grounding label
Chassis grounding label
Fan warning label
Operation warning label
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10

Safety Labels

Table 10-1.
Description
The label suggests the electrostatic-
sensitive equipment.
The label indicates the position of the
grounding terminal. When the equipment
is installed in a 19-inch cabinet, it is
recommended that you use the grounding
terminal specified in this label.
The label indicates the position of the
general grounding terminal. When the
equipment is installed in a cabinet rather
than a 19-inch cabinet, it is recommended
that you use the grounding terminal
specified in this label.
The label suggests that do not touch the fan
leaves when the fan is rotating.
The label indicates the precaution that
should be taken for operations on the PIU
board. For details, see Label.
10 Safety Labels
112