Table of Contents
Advertisement
1 About This Guide
Thank you for purchasing a Huawei CloudEngine 9800 series switch. This guide describes how to install
CloudEngine 9800 series switches. It also explains how to log in to your switch for the first time.
CE9860-4C-EI is used as an example to illustrate how to install, connect, and log in to CloudEngine
9800 series switches.
Figures in the document are for reference only and may be different from actual devices.
For more information, see the
Huawei support website.
2 Packing List
Chassis (with the product model on
the nameplate)
If the switch you ordered has built-in
power modules and fan modules, the
power modules and fan modules are
installed in the chassis before the
delivery by default.
NOTE
The numbers and types of items in the installation accessory package differ for different product models.
The nameplate is located at the bottom of the device.
3 Safety Guidelines
To ensure personal and equipment safety, observe all the safety precautions on the equipment and in
this document. WARNING and CAUTION items do not cover all the safety precautions and are only
supplementary to the safety precautions.
Follow all the safety precautions and instructions provided by Huawei. The safety precautions outlined
in this document are only requirements of Huawei and do not include general safety requirements.
Huawei is not liable for any consequence that results from violation of regulations pertaining to safe
operations or safety codes pertaining to design, production, and equipment use.
WARNING
Laser beams will cause eye damage. Do not look into bores of optical modules or optical fibers without eye protection.
Do not install power cables while the power is on.
Do not turn on the power until you have finished installing the chassis and connecting cables.
CAUTION
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
Take ESD protection measures during equipment installation and maintenance. For example, wear ESD gloves or an ESD wrist strap.
Do not place other objects on the switch.
4 Site Environment
Do not place this product in an environment with flammable or explosive gases, or smoke.
The installation site must be free from leaking or dripping water, heavy dew, and humidity. If the
relative humidity is high, use dehumidifiers or dehumidifying air conditioners.
Hardware Installation and Maintenance Guide
Installation accessory package:
- Chassis ground cable
- Console cable
-
Quick Start Guide
- Expandable guide rails
- Cable management frames
1
for your switch on the
- Floating nuts
- M6 screws
- Cable ties
Advertisement
Table of Contents
