75-Ohm 16 X E1 Cables - Huawei ATN 950B Hardware Description

ATN 950B Multi-service Access Equipment
Hardware Description

9.4.2 75-Ohm 16 x E1 Cables

On the ATN 950B, Anea96 connectors are used to input and output 75-ohm E1 signals.
At one end of the 75-ohm 16 x E1 cable, the Anea96 connector is used to connect the 75-ohm
E1 electrical interface on the board; the other end is connected to the digital distribution frame
(DDF). Make the connector as required on site.
Structure
Figure 9-14
structure of the cable.
Figure 9-14 Appearance of the 75-ohm 16 x E1 cable
Figure 9-15 Structure of the 75-ohm 16 x E1 cable
Pos .1
Pin Assignment
Table 9-15
Issue 03 (2012-07-23)
shows the appearance of the 75-ohm 16 x E1 cable and
1
A
X1
Pos.96
View A
lists the pin assignment of the 75-ohm 16 x E1 cable connector.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Main label
W
Cable Connector, Anea, 96PIN,
Female Connector
9 Cables
Figure 9-15 shows the
103