Huawei ATN 950B Hardware Description page 119

ATN 950B Multi-service Access Equipment
Hardware Description
Type
SC/PC
LC/PC Fiber Connector
Figure 9-18
Figure 9-18 LC/PC fiber connector
Only axial operations instead of rotation is required to insert or remove the LC/PC fiber
connector. To insert or remove an LC/PC fiber connector, do as follows:
l
l
FC/PC Fiber Connector
Figure 9-19
Figure 9-19 FC/PC fiber connector
To insert or remove an FC/PC fiber connector, do as follows:
Issue 03 (2012-07-23)
Description
Square fiber connector/protruding
polished
shows the appearance of the LC/PC fiber connector.
To insert the fiber jumper into the LC/PC connector, align the head of the fiber jumper with
the optical interface and then push the fiber jumper with proper force into the connector.
To remove the LC/PC fiber jumper, press the clip first, push the fiber connector inward
slightly, and then pull out the connector.
shows the appearance of the FC/PC fiber connector.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Usage
9 Cables
110